Skip NavigationShow Sitemap

RSP-H and RSP-V SeriesPHARMACEUTICAL SECURITY

The RSP-H Series machines are specifically designed for compliance with the most demanding security label inspection and finishing applications. The vision system provides 100% inspection of the web and stops the machine when a fault is detected, prior to slitting or other post-inspection operations.

The faulty label is automatically placed on the inspection/splice table where the operator can perform corrective action. Once the fault is corrected, the web reverses and the corrected label passes under the vision system a 2nd time, ensuring 100% compliant product is passed to the next stages of production.

The special design and optional large diameter idlers allow the machine to finish booklet labels.

RSP-H and RSP-V Series

The machines can operate in two distinct levels of compliance conforming to the required level of security. These include:

Full Compliance

In Full-Compliance-Mode, a defective label must be corrected and re-inspected before the process can continue and cannot be overridden by the operator. This mode is intended for applications where 100% compliant labels must be guaranteed.

Controlled Compliance

In this mode, the operator can choose to re-inspect the corrected label with a single button push, or bypass the re-inspection system and accept a defective label after manually inspecting or correcting it. This mode is intended for premium value-add labels that require the highest quality, but leave some discretion for the operator to increase throughput.


SPECIFICATIONS:

Working widths:
440mm (17.32”), 540mm (21.26”), 670mm (26.38”)
Unwind diameter:
750mm (29.53”)
Rewind diameter:
Single rewind = 550mm (21.65”)
Dual rewind = 2 x 600mm 
Run speed up to:
320m/min (1050 fpm) (machine speed is material and vision system dependent)

STANDARD CONFIGURATION INCLUDES:

  • Modular design
  • 15”  touch screen panel on pivoting arm
  • Vision system touch screen panel
  • 100% servo control from Bosch Rexroth
  • Job memory for 500 jobs
  • Remote diagnostics
  • Unwind unit
  • Integration platform ready to accept industry leading vision systems
  • Splice table/inspection plate incl. web guide before the camera system
  • Dynamic web buffer
  • Horizontal inspection area
  • Web guide before the slitting unit
  • Cartridge slitting system incl. LED light (optional special booklet slitting)
  • Label/length counting
  • Single rewind – 76mm (3”) core holder

AVAILABLE OPTIONS:

  • Hydraulic roll lifter for dia. up to 1200mm (47.24”)
  • Waste rewind unit at unwind and before slitting unit
  • Flag & splice detection
  • Static elimination
  • Inkjet integration
  • Shear and razor knife slitting
  • Full automatic knife positioning system – EPOS
  • Dual rewind module 2 x 600mm (23.62”)
  • Lay-on rollers
  • Slip differential shafts
  • Strobe light
  • Rewind shafts – 25mm – 152mm (1” – 6”)

The RSP-V Series machines incorporate a fully integrated 100% vision inspection system which stops the machine when a fault is detected, prior to slitting or other post-inspection operations.

The faulty label is automatically placed on the inspection/splice table where the operator can perform corrective action. Once the fault is corrected the web is rewound in its entirety onto a high capacity rewind for re-inspection prior to slitting for 100% compliance requirements.

For lower security applications, the web can continue directly on to slitting and other post-inspection operations.

The machines can operate in two distinct levels of compliance conforming to the required level of security. These include:

Full Compliance

In Full-Compliance-Mode, a defective label must be corrected and re-inspected before the process can continue and cannot be overridden by the operator. This mode is intended for applications where 100% compliant labels must be guaranteed.

Controlled Compliance

In this mode, the operator can choose to re-inspect the corrected label with a single button push, or bypass the re-inspection system and accept a defective label after manually inspecting or correcting it. This mode is intended for premium value-add labels that require the highest quality, but leave some discretion for the operator to increase throughput.

RSP-H and RSP-V Series

Standard Configuration includes:

  • Compact and robust design
  • 12” touch screen panel on separate HMI console
  • Vision system touch screen panel
  • 100% servo control from Bosch Rexroth
  • Job memory for 500 jobs
  • Remote diagnostics
  • Unwind unit
  • Integration platform ready to accept industry leading vision systems
  • Splice table incl. web guide before the camera system
  • Dynamic web buffer
  • Vertical inspection area
  • Web guide before the slitting unit
  • Cartridge slitting system incl. LED light
  • Label/length counting
  • Single rewind – 76mm (3”) core holder
  • Right to left configuration only

AVAILABLE OPTIONS:

  • Hydraulic roll lifter for dia. up to 1200mm (47.24”)
  • Internal roll lift 750 mm (29,52")
  • Waste rewind unit at unwind and before slitting unit
  • Flag & splice detection
  • Static elimination
  • Inkjet integration
  • Shear and Razor knife slitting
  • Full automatic knife positioning system – EPOS
  • Dual rewind 2 x 420 mm 
  • Big dual rewind module 2 x 600mm (23.62”)
  • Lay-on rollers
  • Slip differential shafts
  • Strobe light
  • Vacuum splice table
  • Rewind shafts – 25mm – 152mm (1” – 6”)

SPECIFICATIONS:

Working widths:
440mm (17.32”), 580mm (22.83”), 640mm (25.20”)
Unwind diameter:
750mm (29.53”)
Rewind diameter:
Single rewind = 550mm (21.65”)
Dual rewind = 2 x 420mm
Run speed up to:
320m/min (1050 fpm) (machine speed is material and vision system dependent)
+49 4107 31 49 60 0
Zum Seitenanfang